NZD
USD
EURO
GBP
HKD
AUD
CAD
SGD
CHF
Product Description
Dynam 5 Channel F4U Corsair 1270mm (50") Wingspan - PNP - DY8953
The F4U was most notable by its awesome power to weight ratio and its agility. The iconic inverted gull wing design gave this bird a unique silhouette in the sky and allowed it to throw a huge prop while clearing an aircraft carrier deck with its low slung landing gears . Its landing gears were able to retract flush into the wings to give it better aerodynamic performance allowing it to hit speeds of 400mph. The F4U was famous for its ability to outrun, outclimb, and out gun any plane during hits heyday in World War II.
Dynam RC recreated this American Military Aviation marvel with its newest F4U Corsair. The plane is constructed of durable EPO foam. The wings span 1270mm and the fuselage length is approx 1066mm. The overall wing loading boasts 50g/dm2. The retractable rotating landing gears tuck away in the wings to provide awesome aerodynamic performance.
The large prop is being thrown by a BM3720-KV500 Brushless Outrunner motor supported by a Detrum 40A ESC. Control surfaces are handled by four 9 gram detrum servos for precise movement. A steerable tail wheel allows the pilot to taxi around the runway. Powering all these electronics is a 14.8v 2200mah Li-Po Battery(not include). The blue paint scheme is vivid and stays true to the F4U scheme. A scale pilot in the cockpit finishes off this beautiful Dynam F4U Corsair.
Features:
- Realistic scale features including WWII Navy paint scheme, hand painted pilot figure, gun ports, and molded panel lines
- Servoless electronic retractable landing gear
- Powerful BM3720A-KV500 Brushless Outrunner motor
- LED navigation lights add scale realism and help make the plane more visible during dawn and dusk flights
- Scale 3-blade propeller
Includes:
- 1 X Dynam 5 Channel F4U Warbird 2.4Ghz RC Plane
- 4 X servos 9g
- 1 X 50A ESC with 3A BEC
- 1 X BM3720A-KV500 Brushless Outrunner Motor
- 1 X English Manual
Specification:
|
Wingspan |
1270mm / 50in |
|
Length |
1066mm / 42in |
|
Flying Weight |
1650g / 58.2oz |
| CG (Center of Gravity) | 85 - 90mm from the leading edge at the wing root |
|
Power System |
BM3720A-KV500 Brushless Outrunner Motor |
|
Electronic Speed Control |
50A Brushless with XT60 connector |
|
Propeller / EDF |
3-Blade Scale Prop |
|
Servos |
4x 9g standard |
| Landing Gear | Retractable |
|
Required Battery |
4S 14.8V 2200mAh 25C LiPo (required) |
|
Required Radio |
5 Channel (required) |
| Ailerons | Yes |
|
Elevator |
Yes |
| Rudder | Yes |
|
Flaps |
No |
|
Lights |
Yes |
|
Hinge Type |
Foam |
| Material | EPO Foam |
| Skill Level | Intermediate |
| Build Time | 2-3 Hours |
| Recommended Environment |
Outdoor |
Required:
- Minimum 5 Channel Radio
- 5 Channel Receiver
- 4S 14.8V 2200mAh LiPo battery Click here for recommendations
- Lipo Battery Charger Click here for recommendations
