Loading... Please wait...- Welcome back Guest
- My Account
- View Cart
- Order Status
- Wish Lists
Categories
New Products
Our Newsletter
- Home
- ELECTRONICS
- Transmitters and Receivers (TX & RX)
- Receiver Accessories
- Dynam 3 IN 1 program card for Stabalizer DTM-1002
Dynam 3 IN 1 program card for Stabalizer DTM-1002
(
1 product review
)
Product Description
Introduction
The 3-in-1 program card is used to set the programmable items for ESCs and stabilizers and measure the voltage for Li-Po battery. Its friendly LCD interface makes the programming and measurement easy.
Features
3-in-1 Program Card:
- Connect with the ESC to set its programmable items. It is applicable for Skylord Advanced series brushless aircraft ESCs, Volcano series brushless car ESCs, etc.
- Connect with the stabilizer or sport receiver (with a built-in stabilizer) to set its programmable items. It is applicable for ISTONE-AII stabilizer, MSR66A sport receiver, etc.
- Work as a voltmeter to measure the voltage of the whole battery pack and each cell. It is suitable for 2S to 8S Li-Po battery.
Specifications
3-in-1 Program Card:
Size (L*W*H): 52.0mm*85.6mm*17.6mm
Weight: 45g
Input Voltage: 5V~12V
Interface: Micro USB, ESC interface, Li-Po battery interface
Packing List
3-in-1 Program Card ×1
Micro USB Cable ×1
Find Similar Products by Category
Product Reviews
-
Dynam 3 in 1 Programming Card
Posted by Dick Soucy on 9th Mar 2022
I have a Dynam Seawind with the stabilizer built into the receiver. I tested the gyro by moving the airplane and all three surfaces were moving in the wrong direction. I revered all three with the 3 in 1 card and they now work fine. It was easy to move through the options and make the changes.
