Toggle menu
86-13427472117

KDS Agile A5 A-5 2.4GHz 6 Channel 6S Belt Drive Radio Controlled Helicopter Kit

CHF301.43
(No reviews yet) Write a Review
SKU:
AG-A5-KIT
Weight:
7.00 KGS
Shipping:
Calculated at Checkout
Adding to cart… category.add_cart_announcement

Product Description

KDS Agile A5 A-5 2.4GHz 6 Channel 6S Belt Drive Radio Controlled Helicopter Kit

 

Introduction:

Congratulations on your purchase of the Agile A-5 radio controlled helicopter kit. Agile A-5 was designed in Europe by
Eng. Gaziano Roberto and is proudly manufactured by KDS Model. Our goal was to offer you something different with a
minimum of parts, easy maintenance, and outstanding flying performances.
It’s time to fly different!...
Enjoy the built and have a great time with you Agile A-5 !
 
 
IMPORTANT NOTES
R/C helicopters, including the AGILE A-5 are not toys. R/C helicopters utilize various high-tech products and
technologies to provide superior performance. Improper use of this product can result in serious injury or even death.
Please read this manual carefully before using and make sure to be conscious of your own personal safety and the
safety of others and your environment when operating all AGILE products. Agile A-5, KDS Model, their affiliates and
authorized distributors are not responsible for personal injuries to the operators and others, and property damages that
could occur from the assembly, maintenance or your use/misuse of this product. Always respect the rules provided by
your local remote control aircraft organization.
 
 
NOTE FOR ASSEMBLY

The following manual provide important instructions to correctly assemble the model. It is structured in a logical way, based on
the work done in previous step. If you change the order, it may result in additional or unnecessary steps. So we suggest you to
read this user manual very carefully to understand correctly the assembly procedure. Failure to do so may not only downgrade
performances but also increase the risk of danger. Apply thread lock as indicated, allow the threadlock to cure before mounting
parts. It is recommended to use threadlock on each bolt or screw that are engaged with metal parts.

 

 

Specification:

Length：1065mm

Height：330mm

Width：182mm
 
Main Rotor Diameter：Ø1250
 
 
Main Blade Length：550mm
 
 
Tail Rotor Diameter：Ø260mm
 
 
Tail Blade Length：92mm
 
 
Motor Pinion：21T
 
 
Motor KV：1200KV
 
 
Driving Gear：(21/54)(17/56)
 
 
Gear Ratio：21T(8.89:1)
 
 
Tail Gear Ratio: 3.86:1
 
 
Weight(w/o power)：2500g(Incl canopy/ main blade/ tail blade)
 
 
Flying Weight: 3200g
 
 
Battery：22.2V 4500-5500mAh
 
 
ESC：120A
 
 
Tools required:
-Hex drivers : 1.5, 2, 2.5, 3, 4mm
-Nut Drivers : 5.5, 7mm
-Ball link pliers
-Diagonal cutting pliers
-Scissors
-Metric ruler
-Soldering iron + solder (for motor and ESC wiring)
-Pitch gauge (for set up)
-Swashplate leveller
-Threadlock blue * (medium)
-Threadlock red * (high strength)
-Bearing retainer compound
-Epoxy A+B Glue
-Grease
-Oil
*Colors may vary depending on your area.
 
 
 
 
 
 
 
Packing list :
1* Agile A-5 RC Helicopter kit
 
 
Required to Fly:

•Brushless electric motor: 6s Lipo - 1200KV
(4mm Bolt holes, 30mm mount width, 6mm * 37mm motor shaft)

•Speed controller: minimum 120A (ESC specs limits should be rated accordingly to the maximum amps handling by the motor)

•Lipo Batteries: 6s 5000-5500 mAh •Electronic flybarless system

•3 pcs Metal standard servo's / 3 pcs Metal medium sized servo's

•1 tail rotor servo, standard size, high speed required

•550 mm main rotor blades

•92 mm tail rotor blades(included)

•6 channel or more helicopter transmitter system, 2.4 Ghz frequency preferred

•Receiver 6 channel or more (working with your transmitter specs)

 

Product Videos

Custom Field

Product Reviews

Write a Review